I was just made aware of the fact that the self-proclaimed psychic and healer Lisa Williams is coming to Norway, and I find I'm getting aggravated at the very prospect of it. My problem, however, is not with Lisa Williams per se, but with any and all people that make a living by exploiting and hustling the gullible and the naive. No "psychic" has ever been able to replicate his/her abilities in rigid scientific studies, and most will never attend such studies obviously because they know the results would be negative. There is no way to quantify or measure "psychic ability", but neither is there any proof at all that such abilities exist.
Any and all "psychics" with their own TV-shows, book deals, performance tours and such are in it for one thing, and one thing only: money. To be able to do what they do they employ and perfect various techniques for various settings, and I will talk about the most common.
Cold Reading.
From Wikipedia: "Cold reading is a series of techniques used by mentalists, illusionists, fortune tellers, psychics, mediums and con artists to determine or express details about another person, often in order to convince them that the reader knows much more about a subject than they actually do."
An experienced cold reader is quickly able to deduce many things about a suject simply by observing the subject's facial expressions, hairstyle, style of clothing, jewelry and so on. The cold reader is forcing - or coercing - the subject to cooperate, and blatantly guessing with various questions of high-probability.
Example:
Reader: "Did your husband linger on in the hospital, or did he pass quickly?"
Subject: "Oh, he died almost immediately!"
Reader: "Yes, because he's saying to me, `I didn't suffer. I was spared any pain.'"
In the above example the reader is coercing the subject to believe that the reader knows something he/she didn't. The information was supplied by the subject to be verified by the reader. Why should the reader, for instance, have to aske the question he/she did in the above example?
And that's what cold reading is. The medium is throwing out suggestions and guesses while expecting (and usually getting) feedback from their subjects. "I get an older man here" is a question, a suggestion, and a guess by the "reader" who expects some reaction from the subject. And while the reaction may be very subtle, the reader has trained himself/herself to pick up even the most unnoticeable of changes in facial expressions. The reaction might just be a nod, or a subtle change in the subject's expression or body language (or the occasional gasp), but the affirmation is supplied by the subject, and not by the reader.
Then the reader might start throwing names out into the audience. "They're saying, John, or Johnny. Do you know this man?" is another wild guess, a question and a suggestion. If there was a John or Johnny the subject will affirm and strengthen the identification, but if there is none the reader will move on whilst brushing it off saying that John or Johnny is there, but was not immediately recognized. If, however, Johnny is remembered later, that will be integrated into the farce.
From James Randi Educational Foundation: "You should observe and listen to a video of a reading. In one such by Van Praagh, prepared by the "48 Hours" TV program, a reading that lasted 60 minutes, we found only TWO actual statements made, and 260 questions asked. Both actual statements--guesses--were wrong. Van Praagh was looking for the name of the woman's deceased husband, and he came up with it by asking, "Do you know anyone named, Jack?" The woman answered, "Yes! Jack, my husband!" But Van Praagh didn't identify "Jack" at all. He asked her if SHE would identify him. By that time, Van Praagh had already tried on her 26 other men's names--all wrong. But, the woman--the subject--forgot about those failures, because they were not important to her. "Jack" was important."
Unfortunately I couldn't find that exact video easily available online, but here is another one showing van Praagh failing during a cold-reading session: van Praagh.
Every psychic, medium or stage clairvoyant (Lisa Williams included) has been using the same set of techniques since time immemorial, and since time immemorial their audience has allowed themselves to be deceived in spite of the fact that common sense should tell them not to. Personally I don't understand why. Why this urge or interest in talking to dead relatives?
Now there are probably some that would argue that some people are just seeking some kind of closure after having their spouse unexpectedly and suddenly die, and that their closure is more important than the methods of achieving it. That makes it even worse. Then the so-called medium, or psychic, is not only preying on the gullible, but they're also exploiting someone else's pain and loss for their own gain. Make no mistake; the ones that make it to the big time with their own TV-shows, performance tours and books deals make millions this way.
So now you probably ask why I am so upset about what other people believe. It's their beliefs and I should just respect them right? Wrong. I see no reason why I should respect and condone a set of beliefs that allow some people to prey on the less fortunate, the emotionally scarred or the gullible in order to line their own pockets. I am a fervent supporter of rationality and logic and what constitutes provable reality, and as such I can not, and will not, respect a system of belief that relies on willful and blatant deception in order to be maintained.
fredag 28. mai 2010
torsdag 27. mai 2010
The Ultimate Machine - part 6 - Completion
Yesterday I finally completed my Ultimate Machine Mk.I.
Following part 5 there really weren't much left to sort out, but the last finishing touches were required. Today I present to you the final pictures of this build, and at long last a video of the machine in action.
As I left you from part 5 I had a couple of things left to do: staining the arm and the hold-down blocks and modifying the switch. Also, as it turned out, I had to modify the forward lid as well as the force from the arm retracting had the lid pop open. This simply would not do, and so I solved the problem by embedding a couple of neodymium magnets into the frame and the bottom of the lid, very effectively securing the lid while allowing it to be opened if needed.
As you can see I also had to modify the arm slightly because occasionally the arm would stop before completing it's cycle, thus locking the machine. I got around this problem by extending the arm with a small piece of wood (which now also needs to be stained obviously).
The simple, yet in my opinion quite effective, modification I made to the switch involved a couple of short lengths of brass tubing. I used a 3mm brass tube inserted into a 4mm brass tube, superglued them together and filed the top round before gluing them to the switch handle. The result is a lengthened handle, and a better looking switch.
So, Mk.I of my Ultimate Machine is done. The design is not perfect, but for some reason I find the semi-scruffy appearance quite suitable. However, when I build the next one I will refine the design a bit as Mk.II I intend to build to keep at my office - and I think Claude Shannon would approve.
There you have it, the machine is completed and functional. And as promised, here is the video of it in action (I hope you enjoy it as much as I enjoyed building it):
Following part 5 there really weren't much left to sort out, but the last finishing touches were required. Today I present to you the final pictures of this build, and at long last a video of the machine in action.
As I left you from part 5 I had a couple of things left to do: staining the arm and the hold-down blocks and modifying the switch. Also, as it turned out, I had to modify the forward lid as well as the force from the arm retracting had the lid pop open. This simply would not do, and so I solved the problem by embedding a couple of neodymium magnets into the frame and the bottom of the lid, very effectively securing the lid while allowing it to be opened if needed.
As you can see I also had to modify the arm slightly because occasionally the arm would stop before completing it's cycle, thus locking the machine. I got around this problem by extending the arm with a small piece of wood (which now also needs to be stained obviously).
The simple, yet in my opinion quite effective, modification I made to the switch involved a couple of short lengths of brass tubing. I used a 3mm brass tube inserted into a 4mm brass tube, superglued them together and filed the top round before gluing them to the switch handle. The result is a lengthened handle, and a better looking switch.
So, Mk.I of my Ultimate Machine is done. The design is not perfect, but for some reason I find the semi-scruffy appearance quite suitable. However, when I build the next one I will refine the design a bit as Mk.II I intend to build to keep at my office - and I think Claude Shannon would approve.
There you have it, the machine is completed and functional. And as promised, here is the video of it in action (I hope you enjoy it as much as I enjoyed building it):
tirsdag 25. mai 2010
The Ultimate Machine - part 5
The machine is now almost done, and while I have had some good advice given to me for improvements in the finish of the box, I am quite happy with it so far. I might take the advice to heart though, and attempt to improve on the finish provided I have time to do so, and if it is not too late. It will, after all, necessitate smoothing out the edges with spackle, sanding it down smooth, an re-staining and lacquering the edges. Hopefully this is possible to do with the machine in its present condition, but if not I'll just make a mental note of remembering to do so for the next machine I build.
So, the machine has been fully assembled and only a few last tweaks and finishing touches remain to be done. I can gleefully report that the machine works flawlessly, though I will need to modify the switch somewhat in order for the servo to be able to flip it. As you remember from my last post my suppliers sent me the wrong kind of DPDT switches (on-off-on instead of on-on), and so I had to run with it and hope for the best. Well, it turns out that using the DPDT on-off-on switches is possible, and it will work, but the toggle function is a little too stiff for the servo to accomplish. Therefore I will modify the switch with a length of brass tubing for added leverage, and this will also have the effect of tying the looks of the switch in a little more with the looks of the rest of the box. Hopefully I'll get this done tonight, but that depends on whether or not the stain on the arm and two hold-down blocks has dried out sufficiently by the time I get home from work.
Here is today's round of pictures.
The switch has now been mounted roughly 2.5cm from the edge of the lid, and while the switch unmodified is too stiff for the arm to flip, it works flawlessly when the switch is aided with improved leverage. Oh, and by the way, I simply could not be bothered to remove the date-stamp from the pictures, and now that I notice it I am unable to as I'm posting this from work and I have yet to get Photoshop reinstalled.
This next pic shows an internal view. Here you can see the arm mounted to the forward lid, and you can see the hold-down block for the microswitch mounted to the bottom. If you squint a little you can just about make out the microswitch being held down by the arm, and underneatht the forward lid you can see the front edge of the servo.
Here's a shot of the same view but from a different angle. I'm showing the controller board along with the battery pack and the various cables being plugged into the board. Also you can see the business end of the arm peeking out from under the closed lid.
Next I'll flip the forward lid, and you'll see how the servo and the arm is mounted. You can also see the hole I routed out for the switch if you follow the leads. By the way, the leads I've used were originally intended to be used in a project to build my own computer case (I will complete this project as well of course, but for now it's in hiatus), and the ones that are pink were supposed to be red. I think the pink colour is due to these cables being fluorescent, but I still feel they should look a good deal more red than they do.
The servo is held in place by being screwed to a small wooden block screwed tightly to the lid. I tried glueing the block down first, but that didn't take all that well, so in the end I just screwed it down tightly.
Finally here's a full shot of the internals exposed. Not much in the box really, but much of this space is taken by the motion of the arm. This post is made the day following these events, and after these shots were taken I stained the arm and the hold-down blocks. Hopefully these will have dried out by the time I get home so that I may lay down the last few finishing touches such as making the final modifications to the switch. Must remember to go out during lunch to get 3 and 4mm brass tubing.
The next time I post the machine will be done, and I will have a video of the machine in action to show you. Trust me when I say that it's hilarious, and that during beta testing yesterday, I couldn't help but giggle uncontrollably.
fredag 21. mai 2010
The Ultimate Machine - part 4
Still feeling peeved at being sent the wrong components, I started soldering the circuit board for the machine. This was refreshing and pleasant work which, accompanied by a couple of glasses of red wine, was highly satisfying. The chance to wield my soldering iron again felt quite exhilarating.
The circuit consists of:
Now all that remains is mounting the board in the box, fitting the servo and the switches and fabricating and fitting the arm. With a little luck I just might get it finished this weekend, but as the arm will have to be stained the drying time might make this impossible. Also, as I am using an on-off-on switch instead of an on-on switch, the result might not be practical. I have registered an order for a couple of replacement on-on switches, and these will hopefully be delivered during next week. So, if my vain hope of making it work with an inappropriate switch fails, there are replacements coming. I aim to have it completed by next weekend.
The circuit consists of:
- 1 220k resistor
- 1 27k resistor
- 1 15k resistor
- 1 1N4148 diode
- 1 0.1uf capacitor
- 1 NE555P timer chip
- 1 4xAA battery holder
- 1 Futaba 4.2kg servo
- 1 DPDT on-on switch (current setup uses an on-off-on switch)
- 1 microswitch
- 8 three pin connectors (four he, four she)
- A few feet of wire - red, yellow, black and blue
- 1 project board
Now all that remains is mounting the board in the box, fitting the servo and the switches and fabricating and fitting the arm. With a little luck I just might get it finished this weekend, but as the arm will have to be stained the drying time might make this impossible. Also, as I am using an on-off-on switch instead of an on-on switch, the result might not be practical. I have registered an order for a couple of replacement on-on switches, and these will hopefully be delivered during next week. So, if my vain hope of making it work with an inappropriate switch fails, there are replacements coming. I aim to have it completed by next weekend.
Rage II - Ultimate Machine Part 3.5
Yesterday I finally received my order from my electronics supplier of choice, and excitedly I went about building the circuit board for my Ultimate Machine - relishing the chance of wielding my soldering iron once again.
I set up the board nice and tidy using three-pin connectors for the switches, power source and servo output, organizing all components logically and neatly across a small board - for practicality as well as for show.
The first thing I noticed was that the electronics suppliers had sent me the wrong diodes, but that was no biggie as I could use the ones they sent me, though it was annoying. Then, after soldering the whole thing together, measuring across the circuit and attempting to start it up for the first time, nothing happened. The circuit is powered, and all looks good, but for some reason the servo doesn't get signals.
Eventually I had to call it a night, and thus I promised myself to sort it out this weekend. Today, as I arrived at the office, I had a thought: yesterday the DPDT switches they had sent me made something in me twitch, but I did not quite react to it. Today however, I suddenly realised that the switches they had sent me are also wrong. I ordered DPDT on-on switches, but they sent me DPDT on-off-on switches - not nearly the same, and very aggravating.
However, I should be able to test the circuit with the wrong switches, but I immediately registered an order for two new DPDT on-on switches on their webshop, and then I sent a copy of the order confirmation to their sales office to make sure they get it sorted.
So let's sum it up:
1. Electronics supplier misplaces my order, making the components over 1 month delayed
2. Electronics supplier sends me the order, but asks for payment for the second time
3. Electronics supplier sends me wrong diodes and wrong switches
The problem is that if I want electronics over here, I will have to use this company as they are the ones most likely to stock what you need.
I set up the board nice and tidy using three-pin connectors for the switches, power source and servo output, organizing all components logically and neatly across a small board - for practicality as well as for show.
The first thing I noticed was that the electronics suppliers had sent me the wrong diodes, but that was no biggie as I could use the ones they sent me, though it was annoying. Then, after soldering the whole thing together, measuring across the circuit and attempting to start it up for the first time, nothing happened. The circuit is powered, and all looks good, but for some reason the servo doesn't get signals.
Eventually I had to call it a night, and thus I promised myself to sort it out this weekend. Today, as I arrived at the office, I had a thought: yesterday the DPDT switches they had sent me made something in me twitch, but I did not quite react to it. Today however, I suddenly realised that the switches they had sent me are also wrong. I ordered DPDT on-on switches, but they sent me DPDT on-off-on switches - not nearly the same, and very aggravating.
However, I should be able to test the circuit with the wrong switches, but I immediately registered an order for two new DPDT on-on switches on their webshop, and then I sent a copy of the order confirmation to their sales office to make sure they get it sorted.
So let's sum it up:
1. Electronics supplier misplaces my order, making the components over 1 month delayed
2. Electronics supplier sends me the order, but asks for payment for the second time
3. Electronics supplier sends me wrong diodes and wrong switches
The problem is that if I want electronics over here, I will have to use this company as they are the ones most likely to stock what you need.
fredag 14. mai 2010
Rage!
So I contacted the company that I had ordered my precious NE555P timer chips (and various other bits and bobs such as highly important DPDT switches) from, and I asked them when I could expect my order to be delivered. I felt it had taken too long to get it shipped to me, and as such they should explain themselves. I'll let you know how this conversation went.
Sensing that the conversation could only deteriorate from there I bid him farewell, donned my coat and went downtown in search of a DPDT switch.
Me: "Hello, yes, I'm calling regarding order number xxxxxxx which I have been expecting for quite some time. The order was placed about a month ago, so now I'm wondering when I might expect to get it."
Person on the other end: "Hang on one second and I'll check it." *sounds of typing*
Person on the other end: "I can't seem to find an order by that number, are you sure you got it registered?"
Me: "Yes I'm sure. I've got the confirmation e-mail from your website right here."
Person on the other end: *sounds of typing* "Could you e-mail me a copy of your receipt?"
Me: "Sure. What address do I use?" *after being given address, mail is sent*
Person on the other end: *sounds of mouse clicks and typing* "I'm sorry. We seem to have misplaced your order, but I promise we'll get it shipped out to you today. How would you like to pay?"
Me: *getting annoyed* "I've already paid for it ... it says so right there on the receipt."
Person on the other end: "Oh so I see. Well then, we'll get it shipped today, and you should have it no later than tuesday of next week."
Me: "That's a little late as I needed my components in order to complete a project by tuesday next week. Can you not ship it to me by express?"
Person on the other end: "I'm sorry, but we don't do that."
Me: "No? But misplacing orders is okay?"
Person on the other end: "Of course not, but even so; there's no express delivery service from our company."
Sensing that the conversation could only deteriorate from there I bid him farewell, donned my coat and went downtown in search of a DPDT switch.
onsdag 12. mai 2010
The Ultimate Machine - part 3
The external staining is done, the lacquer has dried and the box is ready to be reassembled. I'm still a little peeved that I decided to take the box apart for staining, rather than doing it while assembled because I did not want to risk discolouring the screws. But regardless, the parts look gorgeous now, though a little distorted from the staining process - it's not much, but enough to set the edges off ever so slightly.
After the lacquer had dried I looked over the parts, and determined that they were ready for reassembly yesterday night. Gleefully I put the various parts back together, and watched as the box grew back into shape. I think (and hope) you all will agree that whilst it is not perfectly aligned, or perfectly even, it does look very good. Unfortunately I don't have the proper means to take photographs that do justice to the wonderful richness of the dark cherry combined with the high gloss lacquer, but at least you get an idea from these shots.
The box is reassembled, and you can just about make out the shine and reflections from the sides. I hope I can set up a proper (albeit temporary) photography "booth" somewhere in the house for when the machine is completed and take some final shots for you, but for now these will have to do.
Here you can see how the staining has thrown off the lid by just a mm or two, not a lot, but enough to leave something of a gap. It's really not a big deal, and we'll see when the electronics and mechanics are in place, if I may decide to put a brass strip over the gap - or something like that.
And here's a final shot of the finished box with the plaque nailed to the lid. Was I right or what? The brass looks gorgeous against the dark cherry stained and lacquered wood.
This was all I had for this update, but I'll see you again in part 4 quite soon. I'm just awaiting the delivery of the ever important timing chips, and hopefully it'll arrive today or tomorrow. Well, it'll have to arrive by saturday because this is intended to be a birthday present, and as such it must be completed by next tuesday.
After the lacquer had dried I looked over the parts, and determined that they were ready for reassembly yesterday night. Gleefully I put the various parts back together, and watched as the box grew back into shape. I think (and hope) you all will agree that whilst it is not perfectly aligned, or perfectly even, it does look very good. Unfortunately I don't have the proper means to take photographs that do justice to the wonderful richness of the dark cherry combined with the high gloss lacquer, but at least you get an idea from these shots.
The box is reassembled, and you can just about make out the shine and reflections from the sides. I hope I can set up a proper (albeit temporary) photography "booth" somewhere in the house for when the machine is completed and take some final shots for you, but for now these will have to do.
Here you can see how the staining has thrown off the lid by just a mm or two, not a lot, but enough to leave something of a gap. It's really not a big deal, and we'll see when the electronics and mechanics are in place, if I may decide to put a brass strip over the gap - or something like that.
The insides has not yet been stained, but I am planning to do it for consistency, however, I will not lacquer the insides.
And here's a final shot of the finished box with the plaque nailed to the lid. Was I right or what? The brass looks gorgeous against the dark cherry stained and lacquered wood.
This was all I had for this update, but I'll see you again in part 4 quite soon. I'm just awaiting the delivery of the ever important timing chips, and hopefully it'll arrive today or tomorrow. Well, it'll have to arrive by saturday because this is intended to be a birthday present, and as such it must be completed by next tuesday.
Abonner på:
Innlegg (Atom)














